Hex Two Valve Manifolds
 The HM50 is a single flange static pressure manifold that incorporates a primary block valve, a bleed valve and a secondary shutoff valve into a single valve assembly. The secondary shutoff and bleed valve also allows the gauge and transmitter to be removed or bleed without requiring additional valving. The HM50 provides a separate instrument bleed and a calibration entry port to allow for fast, accessible zeroing and calibration of gauge pressure transmitters.
The HM50 features a threaded inlet and flanged outlet, allowing the transmitter to bolt directly to the manifold.
 The HM59 is a line-mounted to valve manifold that functions as a shutoff and bleed valve for static pressure instrumentation. The use of the HM59 Series reduces the number of threaded connections, resulting in fewer potential leak points.
The HM58 level manifold is a simplified, lower cost alternative to D/P level installations. The HM58 allows the user to construct a level installation with minimal components. This method eliminates the need for tubing, fittings, instrument  pipe stands and their associated installation costs.
Two Valve Manifold - Operation Brochure
(Adobe Acrobat Reader Tip: to quickly page through the above Operation Brochure use the arrows at the bottom left of the Acrobat Reader Screen.)
|
